Mail | BHV-Automation
Newsletter | BHV-Automation
Examination of aluminium pressure pouring parts
Examination of aluminium pressure pouring parts

Examination of aluminium pressure pouring parts

The table frame of the rotary testing table, that uses 2 cameras, consists of a 80x40er Item and is ca. 1000x1000mm big with housing (aluminium sheet, white lacquered). A light curtain offers protection. The housing has a door for access to the rear area with safety switch. The aluminium plate has a diameter between 600mm and 800mm, 4 pan shots on plate and component query are made by external light guides.

Manually inserted will be with the round site downwards, the outer contour will be centered, where the groove for the seal of the product is. Clamping is made from one side from the outside on the product. Station 2 is the turning unit for pan shots.

Station 3 sets the clamping off (Pick and Place) and has 3 axis for bad parts on conveyor belt MK (1,5 m long) and a turning unit for pan shots.

Station 4/1 is the finished part removal, Cancellation of clamping and hoisting for faster part removal. Deposition on NIO belt takes place, whereby rework parts are pushed on the right side of the belt. NIO parts lay left on the belt.

The drives are pneumatical, the table drive works electrical. Brackets for 2 area scan cameras with telecentric optics and suitable lighting are existing. The valve terminal and service unit is made as open installation.

There is a drive (asynchronous motor + FU) for turning plate and brackets for monitor and keyboard.

Examination of aluminium pressure pouring partsExamination of aluminium pressure pouring parts
Examination of aluminium pressure pouring parts
Examination of aluminium pressure pouring parts
[top]

Unsere Projekte im Sondermaschinenbau | Our projects in special machine construction